Key facts
- University of Pennsylvania researchers announced on November 15, 2026 that they built hybrid layered insulating film stacks (HyLIFS) from hundreds of Mylar sheets for possible lunar habitat insulation.
- The material combines strong resistance to physical damage with effective thermal insulation, according to senior author Igor Bargatin, Associate Professor in Mechanical Engineering and Applied Mechanics at Penn.
- Laboratory samples withstood compression to approximately 20 megapascals ten times in a row without losing insulating performance, said first author Danielle R. Levin.
- Current HyLIFS samples are about one square centimeter in size and require hours of careful cutting and manual stacking, making large-scale habitat insulation impractical today.
University of Pennsylvania researchers announced on Nov. 15, 2026 that they built hybrid layered insulating film stacks, called HyLIFS, from hundreds of Mylar sheets for possible lunar habitat insulation. ScienceDaily reported the announcement based on the university’s release. The work was hosted by Penn Engineering.
Mylar is formally known as biaxially oriented polyethylene terephthalate, or BoPET, a polyester film. An aluminum coating lets the material reflect infrared radiation, which helps prevent heat from escaping. Mylar already sees heavy use in aerospace technology and appears in lightweight emergency blankets handed out after marathons.
The Penn researchers tested different film thicknesses and added thin alumina coatings, or aluminum oxide, to some Mylar sheets to make them stiffer. Building the experimental stacks required painstaking manual work because the team placed each thin film one by one. The team handled the delicate films with tweezers and small weights, and breath near a stack can blow the layers away.
Moon temperatures reach hundreds of degrees below zero and also boiling hot. Insulation for lunar habitats must survive those conditions along with transportation, installation, accidental impacts and years of handling.
Air pressure inside a lunar habitat pushes on walls facing the vacuum outside, creating compression loads like those used in laboratory tests. Astronauts might accidentally hit or press habitat insulation during maintenance or routine tasks. The university’s release notes this risk matters after construction is complete, not only during transport and installation.
Aerogels are lightweight and good at retaining heat, but their delicate internal structure is vulnerable to impacts and compression despite use in industrial pipelines and NASA’s Mars rovers. Standard multilayer insulation, a layered material that blocks radiative heat transfer, cannot support substantial weight, and routine contact may tear it or cause other damage. The researchers said making insulation stronger often creates another problem because changes that add durability can also allow more heat to pass through.
The material combines strong resistance to physical damage with effective thermal insulation, according to senior author Igor Bargatin, associate professor in mechanical engineering and applied mechanics at Penn. “These stacks of Mylar can bend, withstand substantial compression and maintain their insulating performance,” Bargatin said.
Laboratory samples withstood compression to approximately 20 megapascals, a unit of pressure, ten times in a row without losing insulating performance, said first author Danielle R. Levin. Levin described 20 megapascals as comparable to 200 pounds of force on a fingertip-sized area.
Lab tests in a vacuum, or space-like conditions with no air, showed the strongest stacks matched advanced vacuum insulation performance and stayed flexible. The researchers tested the material under compression like what insulation might face inside a lunar habitat, where internal air pressure pushes on walls exposed to the vacuum outside.
Alumina-coated stacks handled the highest compressive stresses, or forces that squeeze a material, the lab equipment could apply while keeping their insulating performance. The results showed that adding durability does not have to mean losing thermal protection, according to the researchers.
Current HyLIFS samples are about one square centimeter in size and require hours of careful cutting and manual stacking, making large-scale habitat insulation currently impractical. The researchers said they need a more efficient production method, such as coating large rolls of Mylar to make meter-scale sheets instead of centimeter-scale samples.
One possible production method would continuously apply coatings to large rolls of Mylar, potentially yielding sheets measured in meters rather than the current centimeter scale. A roll-to-roll coating approach might let engineers adjust plastic thickness, protective coatings, and antiblocking particle distribution before assembling larger stacks. Antiblocking particles are additives that stop plastic sheets from sticking together. The researchers said they must scale this way to make the material practical for insulating an entire habitat.
Large-scale production could let the material shield lunar habitats, spacesuits, and other gear meant for long use in space vacuum. The University of Pennsylvania release ties this potential to solving the current hours-long, manual assembly that keeps experimental samples at about one square centimeter. The technology could provide lightweight, durable insulation for habitats, rovers, electronics, and other systems in space once researchers solve those challenges.
Microscopic antiblocking particles added to commercial Mylar films keep neighboring sheets from clinging together, but in a vacuum they create contact points through which much of the heat moves from one sheet to the next. Manufacturers have long used the particles to stop Mylar sheets from clinging by adding particles that extend slightly above the plastic surface, but their effect on heat transfer between stacked films had received little attention.
Thinner Mylar sheets do not automatically insulate better because antiblocking particles in thinner sheets create more contact between adjacent layers, adding new paths for heat to travel. The researchers initially expected stacking more films in the same area to improve insulation, but experiments showed the thinnest alumina-coated films performed similarly to medium-thickness films.
The team modeled how heat moves between single layers and compared those model predictions with lab measurements. That work showed that much heat crossing from one Mylar sheet to the next passes through contact points made by antiblocking particles. Engineers could treat the particles as a design feature, adjusting their size, abundance, and placement to cut unwanted heat transfer and improve future insulation design.
Before lunar use, researchers must test large versions of the material to confirm they retain laboratory insulating properties and mechanical strength, and to assess tolerance to repeated bending, impacts, scratches and wear. The researchers said further testing must establish real-world durability.
Co-authors are Matthew F. Campbell, Gulzhan Aldan, and Orevaoghene H. Omodior. Funding came from the National Science Foundation Division of Chemical, Bioengineering, Environmental and Transport Systems under grant number 1845933 and from Penn Engineering. The paper, “Robust Layered Thermal Insulator Film Stacks for Vacuum Applications,” appeared in ACS Applied Materials in 2026, volume 18, issue 36, page 48946, with DOI 10.1021/acsami.6c09126.
First author Danielle R. Levin, a recent Penn doctoral graduate in chemistry who also received a master’s in mechanical engineering and applied mechanics, said the material could open a pathway to inexpensive, durable and reusable lunar insulation. Levin said the results teach a broader lesson: ordinary items can show surprising abilities when researchers look at how their structures respond to different conditions. The release says this lesson comes from looking closely at a commonplace material like Mylar.





Join the discussion