Key facts
- On November 18, 2026, NASA ran a planned 200-second hot-fire test of RS-25 development engine No. 10001 at the Fred Haise Test Stand at Stennis Space Center near Bay St. Louis, Mississippi.
- The RS-25 development engine No. 10001 is a non-flight unit, yet its hot fire yields data to improve performance and reliability for future Artemis missions.
- The Artemis III engines burn cryogenic liquid hydrogen and liquid oxygen and use radiation-hardened digital engine control units with upgraded thermal insulation.
- NASA will fly an Artemis III demonstration mission in 2027 before astronauts land on the moon in 2028.
On Nov. 18, 2026, NASA ran a planned 200-second hot-fire test of RS-25 development engine No. 10001 at the Fred Haise Test Stand at Stennis Space Center near Bay St. Louis, Mississippi.
The agency and its prime contractor, L3Harris Technologies, used the developmental firing to capture critical data to improve performance and reliability for future Artemis missions, even though the non-flight unit will not fly. NASA said the unit still helps improve engine performance and reliability.
Operators from NASA, L3Harris, and Nova Space Solutions test and prove all flight RS-25 engines flightworthy at NASA Stennis, a flight-qualification step separate from the November 2026 developmental firing of No. 10001. Test crews include personnel from all three organizations.
Four RS-25 engines generate up to 2 million pounds of combined thrust to help launch the SLS rocket on every Artemis mission. The Artemis III engines produce over 2 million pounds of combined vacuum thrust during the eight-minute ascent to orbit.
NASA plans an Artemis IV Moon landing mission in 2028, launching astronauts aboard Orion on the SLS rocket from Kennedy Space Center in Florida. satnews.com links the engine shipment to Artemis III as the crewed lunar landing mission, while Phys.org places astronaut landings in 2028 after an Artemis III demonstration in 2027.
The agency describes Artemis IV as a key step in goals to explore the lunar South Pole, establish an enduring human lunar presence, and build a foundation for the first crewed Mars mission. The Nov. 18 hot-fire test supports future Artemis missions.
L3Harris announced on July 22, 2026, that it completed and shipped four modified RS-25 main engines to NASA’s Michoud Assembly Facility in New Orleans. The shipment finishes the first phase of upgraded shuttle-engine hardware in the Artemis propulsion architecture.
The delivery marks the final deployment of upgraded Space Shuttle main engine hardware within the initial phase of Artemis propulsion architecture. satnews.com frames the delivery as the end of an initial phase that used repurposed shuttle hardware, while production shifts to newly built engines.
The first four SLS missions use repurposed shuttle engines retrofitted with modern controllers. L3Harris has assembled newly designed RS-25 hardware for Artemis V and conducted extensive hot-fire acceptance testing at Stennis.
The Artemis III engines burn cryogenic liquid hydrogen and liquid oxygen and use radiation-hardened digital engine control units built for higher processing speeds and enhanced diagnostic telemetry. Upgraded thermal protection insulation around the powerhead and nozzle assemblies lets the engines withstand high acoustic and thermal environments.
Boeing and NASA technicians will begin installing and aligning the four engines after arrival at Michoud, fitting them on the core stage’s engine section. After teams complete gimbal-system checkout, they will prepare the assembled stage for a barge trip to Kennedy Space Center for stacking.
For Artemis III, NASA will fly a demonstration mission in 2027 before astronauts land on the moon in 2028. The flight will let teams rehearse docking between commercial human landing systems and Orion.
Three powerful rockets will launch in quick succession for the Artemis III demonstration, exercising ground processing, launch crews, facilities, control centers, networking and data exchange at key U.S. sites. Blue Origin’s test article will lift off first and wait in space for up to 30 days before SLS and Orion launch from Launch Complex 39B at Kennedy Space Center.
SpaceX will then launch its Starship test lander to rendezvous with Orion for on-orbit testing, while Orion flies in a circular orbit throughout the mission and operates as the chaser spacecraft using the lander test articles as targets. All three rockets will have more launch opportunities than a lunar mission and can reach designated mission altitude in a single launch. Software testing for Artemis III will show that Orion and the commercial lander prototypes can meet at a set time and place in space.
The company’s Starship Version 3 test article will carry an added nose docking system on the 171-foot spacecraft, and astronauts will not enter it during the mission. Blue Origin will test its planned HLS crew cabin, based on the Mark 2 crew lander architecture, and up to two crew members in orange Orion crew survival system suits will open the hatch to enter that test lander.
When docked with Blue Moon, Orion’s software will control the docked spacecraft, while the SpaceX test article will control the docked spacecraft for the second portion of the mission. During docking, Orion will dock along the side of Blue Moon adjacent to the crew cabin and later dock nose-to-nose with the SpaceX test lander. The docking phases will let NASA and partner teams test hardware and software interoperability and integrated lander-Orion dynamics.
NASA will verify both Artemis III test landers are mission-ready and crew-safe before the mission. The verification builds on earlier ground tests in which SpaceX qualified docking capability in 2023 and Blue Origin tested its pressurized docking system earlier in 2026.
Blue Origin’s Artemis III test lander, Blue Moon, builds on the Mark 2 crew lander architecture and incorporates major avionics, flight software and control systems. Production lander hardware must incorporate an Environmental Control and Life Support System, a crew cabin and avionics like the test article, and the test lander will fly an instrumented lunar surface spacesuit mass simulator for real-time cabin environment feedback. The simulator recalls the suited Moonikin manikin that flew aboard Orion during the uncrewed Artemis I test flight.
Data from Artemis III and future uncrewed lunar demonstration missions will support astronaut safety and mission success for crewed lunar landings. NASA works with two American companies, SpaceX and Blue Origin, to develop human landing systems for future Artemis missions, and for future crewed lunar missions NASA and one commercial lander partner will use a dual launch campaign, prepositioning a lander in orbit for a crewed Orion launched on SLS.





Join the discussion